11/27/21 - The boat is ready to be finished.

View of the interior.

11/30/21 - The gaps between the panels are filled with epoxy.

12/1/21 - A seal coal of epoxy is applied to the hull.

The undersides of the seats are sealed with epoxy..

12/6/21 - The hull is partially sanded.

12/7/21 - The hull is fully sanded.

1/1/22 - The first coat of primer is applied to the hull.

1/3/22 - The primer is sanded.

1/4/22 - First coat of paint is applied to the hull.

1/7/22 - Several coats have been applied.

1/25/22 - Oarlock risers are epoxied in place.

The rudder trunk assembly is started.

1/30/22 - The rudder is temporarily mounted.

1/31/22 - The rudder is shaped.

The daggerboard is shaped.

Top sides of the seats are ready for epoxy.

The spars are epoxied to full length.

2/1/22 - The spars are shaped.

Batten for sail track is epoxied to the mast.

The interior is given a seal coat of epoxy.

2/2/22 - Sail track and halyard block are temporarly fit on the mast.

Daggerboard and rudder are fiberglassed and rudder truck epoxy coated.

2/3/22 - Foam for reserve floatation is epoxied together.

2/4/22 - Foam is cut to fit under the seats.

Foam will be painted to blend in.

Interior is partially sanded.

Spars are epoxy coated.

2/8/22 - The interior is sanded.

Foam floatation is sealed with epoxy.

Areas to be varnished are taped off.

2/11/22 - The foam is given a coat of primer.

2/14/22 - The interior is primed.

2/15/22 - The primer is sanded.

First coat of paint is applied.

Floatation foam is painted.

2/17/22 - The rudder trunk is painted.

Several coats of paint have been applied.

Floatation foam is epoxied to the underside of the seats.

2/18/22 - The boat is ready for varnish.

2/20/22 - Accents of wood are varnished.

2/23/22 - The boat is moved outside now that finishing is complete.

View from the bow.

Seats are installed.

Varnishing the spars is started.

2/28/22 - Sailtrack, shrouds, and gooseneck are installed on the mast.

3/1/22 - The mast shrouds are set up.