8/16/19 - The flipside of the panels are epoxied together.

8/18/19 - The hull is fully wired.

8/19/19 - The seams are filled with thickened epoxy.

8/20/19 - The seams on the other side are filled with epoxy.

The cloth is saturated with epoxy.

Excess cloth is trimmed.

8/27/19 - The recessed deck fittings are cut out.

The deck is fully wired together.

The underside of the deck is ready for epoxy.

The fiberglass and wood are saturated with epoxy.

Gaps in the deck seams are filled with epoxy.

8/30/19 - The recessed deck fittings are epoxied in place.

The deck is epoxied to the hull.

9/1/19 - The hull is sanded smooth.

The fiberglass is saturated with epoxy.

9/3/19 - The deck is fiberglassed.

9/4/19 - The coaming riser is epoxied in place.

Excess cloth is trimmed.

9/9/19 - The hatches are cut out.

9/10/19 - The aft hatch lips are epoxied in place.

Coaming is cleaned up and sealed with epoxy.

Forward hatch lip is installed.

9/22/19 - The boat is washed and ready for varnish.

The first coat of varnish is applied.

10/23/19 - The hatch gaskets are glued in place and the deck rigging is installed.

Strapless hatch system is installed.