2/12/25 - The kit is unwrapped.

2/13/25 - The bottom and #1 panels are wired together.

2/14/25 - Panels #2 and #3 are wired in place. The transom and temp frame are wired in place.

Panel #4

All the panels are in place and the boat is flipped over.

2/15/25 - The wires are tightenedand the seams between penels are filled with epoxy.

2/26/25 - The boat is flipped and the wires are pulled out.

2/27/25 - The inside seams are partially filled.

3/3/25 - The bow stem is filled with epoxy.

All the interior joints are filled with epoxy.

Rope attachement point is installed.

3/4/25 - Fiberglass cloth is laid on half the interior.

3/5/25 - The glass is saturated with epoxy.

3/6/25 - Second half of the interior gets fiberglass.

The glass is epoxy saturated.

3/17/25 - Breasthook is epoxied in place.

Quarter knees are installed.

3/19/25 - The interior is sanded.

3/20/25 - The seats are laid out.

3/25/25 - Stiffeners are epoxied to the undersides of the thwarts.

The aft seat is tack glued into place.

Forward seat is tack glued into place.