I am finishing this boat for an owner who started the build and then was unable to get back to it for about 5 years. It has soft padeyes, an upgraded seat, and perimeter lines.
Length: 14 feet 5 inches
Beam: 25.5 inches
Weight: ~30 pounds
-
6/10/20 - The boat is done!
-
Pygmy Pinguino 145
-
Pygmy Pinguino 145
-
Pygmy Pinguino 145
-
5/10/20 - The project begins.
-
5/12/20 - The starboard side sheer seam is filled with epoxy and fiberglass tape.
-
Gaps between panels are filled with epoxy.
-
5/14/20 - The Hull is half sanded.
-
Fiberglass cloth is laid on the hull.
-
5/15/20 - A fill coat of epoxy is applied.
-
5/18/20 - Gaps between the deck panels are filled with epoxy.
-
5/19/20 - The deck is sanded smooth.
-
Fiberglass cloth is laid on the deck.
-
5/21/20 - A fill coat of epoxy is added.
-
Cockpit coaming lips are fiberglassed.
-
Footbrace studs are installed.
-
5/27/20 - The coaming riser is epoxied into place.
-
5/29/20 - The entire boat is sanded.
-
5/30/20 - The coaming is ready for fiberglass.
-
Hatch lips are epoxied in place.
-
5/31/20 - The coaming is given epoxy fill coats.
-
6/5/20 - Several coats of varnish have been applied.
-
5/7/20 - The deck has two coats of varnish.
-
6/9/20 - The deck rigging and seat are installed.
Link to full construction gallery.