Pygmy Coho - Hull #2

I built this Pygmy Coho for a customer in Seattle.  This boat was partially built by the customer until he gave up building it because he was worried it wasn't going to turn out well.  It was in very rough shape and I had to to major "corrective construction" on it. I completed construction and varnished the boat for him.

Length:  17 feet 6 inches
Beam:  23 inches
Weight: 39 lbs.
Photos of the completed project.

Click on photos for slideshow
  • I finished the boat on 8/26/06

    I finished the boat on 8/26/06

  • Pygmy Coho

    Pygmy Coho

  • Pygmy Coho

    Pygmy Coho

  • The condition of the boat when I got it.

    The condition of the boat when I got it.

  • It was in pretty rough shape.

    It was in pretty rough shape.

  • The deck has been partially sanded.

    The deck has been partially sanded.

  • After sanding off the old fiberglass, I had to patch many problem areas.

    After sanding off the old fiberglass, I had to patch many problem areas.

  • The hull is re-fiberglassed.

    The hull is re-fiberglassed.

  • Another view of hull.

    Another view of hull.

  • The deck is fiberglassed.

    The deck is fiberglassed.

  • Fiberglassing a bulkhead. I put a custom nameplate under the glass.

    Fiberglassing a bulkhead. I put a custom nameplate under the glass.

  • I am holding the fully sanded boat.

    I am holding the fully sanded boat.

  • Ready for varnish.

    Ready for varnish.

  • Varnish has been applied. You can see evidence of my

    Varnish has been applied. You can see evidence of my "corrective construction" on the bow.

  • Soft padeyes are installed.

    Soft padeyes are installed.

Selected photos of the construction process.

Click on photo for slideshow.