9/25/17 - The first 4 panels of the hull are loosely wired together.

The seams are filled with thickened epoxy.

9/29/17 - Half of the hull is sanded smooth.

Fiberglass cloth is smoothed on the hull.

10/2/17 - The hull is flipped over and temporary frames for the deck are attached.

All hull panels are wired together.

10/17/17 - The interior is fiberglassed.

10/18/17 - The bow and stern tips are filled with thickened epoxy.

The deck has been sanded smooth in preparation for fiberglassing.

11/2/17 - The forward cockpit coaming riser is epoxied in place.

11/2/17 - The coaming lips are fiberglassed.

11/14/17 - Toggles for the strapless hatch system are laminated together.

11/29/17 - The first coat of varnish is on the hull.

12/5/17 - Soft Padeyes are installed.