I built this Pinguino from start to finish. It has a custom seat, soft padeyes, bulkheads, reflective perimeter line, and strapless hatches.
Length: 14 feet 6 inches
Beam: 25.5 inches
Weight: 36 lbs.
Click on photos for slideshow
-
6/14/14 - The boat is finished!
-
6/14/14 - The boat is finished!
-
6/14/14 - The boat is finished!
-
6/14/14 - The boat is finished!
-
6/14/14 - The boat is finished!
-
4/5/14 - The first step is to glue the hull panels to full length.
-
4/6/14 - The last two hull panels are about to be glued together.
-
The temporary frames are wired into place.
-
4/13/14 - The hull seams are glued with epoxy.
-
4/19/14 - The hull is fiberglassed.
-
4/25/14 - The deck is partially stitched up.
-
The entire underside of the deck gets the first fill coat of epoxy.
-
5/7/14 - The interior is fiberglassed.
-
5/15/14 - The deck is sanded smooth.
-
5/18/14 - The deck is fiberglassed.
-
5/23/14 - The aft hatch is cut out.
-
5/25/14 - The hull has been sanded.
-
5/29/14 - The coaming is given a fill coat of epoxy. Also the aft bulkhead is tack-glued in place.
-
5/8/14 - The deck has a few coats of varnish on it.
